Update 'STM32/README.md'

STM32/README.md

@@ -5,13 +5,17 @@ This project that has been developed on the Mac with STM32CubeIDE, Version: 1.8.
 - Scan and send temperatures of all connected DS18B20 (Max 5 units)
 - Control out DI with UART2 Rx control (the blue pill green LED) 
 
+
+[More STM32 Docs](https://docs.google.com/document/d/1Wjg423PqePENCzdlPTyxFAglW16Ct_v9gj3FkSOzNIo/edit?usp=sharing)
+
 ## Functions
 
-Master clock with PLL is set to 56MHz
-The TIM1 is used in OW to get an exact delay. When measuring OW then ADC interrupt is off
-ADC1 is set to contious mode with interrupt
-Max and Min values of ADC is measured and then sustracted and sent
-Control on UART2 Rx {0} and {1} will control the green led on the blue pill card
+Master clock with PLL is set to 56MHz  
+The TIM1 is used in OW to get an exact delay. When measuring OW then ADC interrupt is off.  
+ADC1 is set to contious mode with interrupt.  
+Max and Min values of ADC is measured and then sustracted and sent.  
+Control on UART2 Rx {0} and {1} will control the green led on the blue pill card.  
+
 Data is sent every 10 seconds in format:
 ```
 {VPP,0,2164}
@@ -21,13 +25,13 @@ Data is sent every 10 seconds in format:
 
 ## ADC Timing
 
-Tconv = Sampling time + 12.5 cycles
-Example:
-With an ADCCLK = 14 MHz and a sampling time of 1.5 cycles: Tconv = 1.5 + 12.5 = 14 cycles = 1 μs
-In this application we want to sample a 50Hz signal = 20mS
-Calcs here: https://docs.google.com/spreadsheets/d/1an5f3Aog4bdwpe-rDquWTxlXBpsXEK-1DVhAsiCqlq0/edit#gid=304302332
+Tconv = Sampling time + 12.5 cycles  
+Example:  
+With an ADCCLK = 14 MHz and a sampling time of 1.5 cycles: Tconv = 1.5 + 12.5 = 14 cycles = 1 μs  
+In this application we want to sample a 50Hz signal = 20mS  
+[Calcs here](https://docs.google.com/spreadsheets/d/1an5f3Aog4bdwpe-rDquWTxlXBpsXEK-1DVhAsiCqlq0/edit#gid=304302332)
   
-
+--------------------------------------
 
 Select the instructions depending on Espressif chip installed on your development board: