/*
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/
#include <esp_system.h>

#ifndef DS18B20_H_  
#define DS18B20_H_

// warning: 'taskENTER_CRITICAL(mux)' is deprecated in ESP-IDF, consider using 'portENTER_CRITICAL(mux)'
//#define noInterrupts() portMUX_TYPE mux = portMUX_INITIALIZER_UNLOCKED;taskENTER_CRITICAL(&mux)
//#define interrupts() taskEXIT_CRITICAL(&mux)
#define noInterrupts() 
#define interrupts() 

#define DEVICE_DISCONNECTED_C -127
#define DEVICE_DISCONNECTED_F -196.6
#define DEVICE_DISCONNECTED_RAW -7040
#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
#define pgm_read_byte(addr)   (*(const unsigned char *)(addr))

typedef uint8_t DeviceAddress[8];
typedef uint8_t ScratchPad[9];

// Dow-CRC using polynomial X^8 + X^5 + X^4 + X^0
// Tiny 2x16 entry CRC table created by Arjen Lentz
// See http://lentz.com.au/blog/calculating-crc-with-a-tiny-32-entry-lookup-table
static const uint8_t dscrc2x16_table[] = {
	0x00, 0x5E, 0xBC, 0xE2, 0x61, 0x3F, 0xDD, 0x83,
	0xC2, 0x9C, 0x7E, 0x20, 0xA3, 0xFD, 0x1F, 0x41,
	0x00, 0x9D, 0x23, 0xBE, 0x46, 0xDB, 0x65, 0xF8,
	0x8C, 0x11, 0xAF, 0x32, 0xCA, 0x57, 0xE9, 0x74
};

/* *INDENT-OFF* */
#ifdef __cplusplus
    extern "C" {
#endif
/* *INDENT-ON* */

void ds18b20_init(int GPIO);

#define ds18b20_send ds18b20_write
#define ds18b20_send_byte ds18b20_write_byte
#define ds18b20_RST_PULSE ds18b20_reset

void ds18b20_write(char bit);
unsigned char ds18b20_read(void);
void ds18b20_write_byte(char data);
unsigned char ds18b20_read_byte(void);
unsigned char ds18b20_reset(void);

bool ds18b20_setResolution(const DeviceAddress tempSensorAddresses[], int numAddresses, uint8_t newResolution);
bool ds18b20_isConnected(const DeviceAddress *deviceAddress, uint8_t *scratchPad);
void ds18b20_writeScratchPad(const DeviceAddress *deviceAddress, const uint8_t *scratchPad);
bool ds18b20_readScratchPad(const DeviceAddress *deviceAddress, uint8_t *scratchPad);
void ds18b20_select(const DeviceAddress *address);
uint8_t ds18b20_crc8(const uint8_t *addr, uint8_t len);
bool ds18b20_isAllZeros(const uint8_t * const scratchPad);
bool isConversionComplete();
uint16_t millisToWaitForConversion();

void ds18b20_requestTemperatures();
float ds18b20_getTempF(const DeviceAddress *deviceAddress);
float ds18b20_getTempC(const DeviceAddress *deviceAddress);
int16_t calculateTemperature(const DeviceAddress *deviceAddress, uint8_t* scratchPad);
float ds18b20_get_temp(void);

void reset_search();
bool search(uint8_t *newAddr, bool search_mode);

/* *INDENT-OFF* */
#ifdef __cplusplus
    }
#endif
/* *INDENT-ON* */

#endif