HomeEnergyMeter/main/main.c

#include <stdio.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "esp_spi_flash.h"
#include "freertos/queue.h"
#include "driver/ledc.h"
#include "driver/pcnt.h"
#include "esp_attr.h"
#include "esp_log.h"
#include "config.h"
#include "wifi.h"
#include "uart.h"
#include "serial.h"

// Externs
extern void ledc_init(void);
extern void init_pcnt_unit();
extern double getkWh(uint32_t *bigCnt, int32_t *cnt);

extern void mqtt_init();
extern void sendMQTTMessage(const char * topic, const char * data);

extern void sendHTTPMessage(const double inData, const uint32_t bigCnt, const int32_t cnt);

// Chip info:
// This is esp32 chip with 2 CPU cores, WiFi/BT/BLE, silicon revision 1, 4MB external flash

/** Electric meter:
 * 10000 impulses per kWh
 * Some normal max number could be 120 kWh/24h = 5 kWh/hour = 50000 pulses/hour = 833 pulses/min = 14 pulses/sec
 * 
 * Counter is 16 bit signed = Max 32768 pulses = Will NOT work for one hour !!!!!
 * So we need some other way of counting higher numbers that will last for one h
 * Probably we need to use interrupts !
 */

void app_main(void)
{
    ESP_LOGI("MAIN", "HomeEnergyMeter ESP32");

    
    init_pcnt_unit();
    ledc_init();
#ifdef WIFI_ENABLED
    initWifi();             // Init WIFI
#endif
#ifdef MQTT_ENABLED
    mqtt_init();
#endif

#ifdef SERIAL_ENABLED
    initUart();
    xTaskCreate(serialRxTask, "Serial_RX_Task", 10000, NULL, 10, NULL);
#endif

    char dataStr[100];
    double kWh = 0.0;
    uint32_t bigCnt = 0;
    int32_t cnt = 0;

    while( true ) {


        kWh = getkWh(&bigCnt, &cnt);

        sprintf(dataStr,"%.5f",kWh);

        // @TODO This is changed for testing
#ifdef MQTT_ENABLED
        sendMQTTMessage("/sensors/TEST/energy/electricalTotal", dataStr);
#endif

#ifdef WIFI_ENABLED
        sendHTTPMessage(kWh, bigCnt, cnt);
#endif

        ESP_LOGI("MAIN", "%.4f   %u    %d",kWh,bigCnt,cnt);

        vTaskDelay(60000 / portTICK_PERIOD_MS);
    }
    esp_restart();
}