from homeassistant.const import EVENT_STATE_CHANGED

"""
Kitchen LED Documentation:
Kitchen worktop lights use two different LED-Strips with two different color temperatures:
2700 and 4000K. They are controlled individually with two MOSFET PWM controllers.
The PWM-controller (STM32-board) receives its information via a serial line (9600) from
the Pi3. The Pi3 sends data in ASCII format <1234ABCD> to control the 2 channels.
The Pi3 has a Python-script running as a service kitchen_led.service that acts like two separate
Home Assistant MQTT Lights: "Kitchen worktop 4K" and "Kitchen worktop 27K". They can be
controller with On/Off and brightness individually.
The lights can be in 3 different modes: 1:Off, 2:Soft and 3:Work

3:Work is controlled by a manual switch (a helper) called "input_boolean.kitchen_worklights"
When change the value of the switch the function kitchen_worklights_button_trigger() reacts
to the events and start a control-chain.

2:Soft and 1:Off is controller when the household lights are changed between different modes.
The function kitchen_worklights_button_trigger() is called directly from these goto-mode-functions.

As a security measure the whole Power Supply to the LED-controller is electrically controlled
with an IKEA Switch. So when the LEDs are Off, then the circuit is fully electrically Off.

The full chain is:
1. Either by trigger or functional call the function kitchen_worklights_button_trigger() is called.
It checks if the LEDs are to be one of the On-modes or Off. It then controls the IKEA Switch to turn the
whole Kitchen LED on or off (electrically with a relay in the IKEA Switch). 
If the IKEA Switch was already On, then it calls handle_kitchen_worklights()

2. If the IKEA Switch was off and was turned on in step 1, then the event-trigger-function
kitchen_worklights_security_switch_trigger() reacts to that state-change.
If change Off-On then it waits a samll time before calling the third step handle_kitchen_worklights()
If On-Off, then calls that function directly.

3. The last step in function handle_kitchen_worklights() is controlling the two separate
MQTT-Lights in Home Assistant to achieve the setup that is wanted in each of the three modes.
"""

# Reacts to when the Kitchen Worklights button is changed
# This could be from HA UI or from web-interface
# Or it can be called from a light mode change
@service
@state_trigger("input_boolean.kitchen_worklights")
def kitchen_worklights_button_trigger():
    isChristmas  = True if input_boolean.christmas == 'on' else False
    log.info(f"1. Kitchen worklight changed. State:{input_boolean.kitchen_worklights} Mode:{input_select.light_mode} Jul:{isChristmas}")
    if( input_boolean.kitchen_worklights=='on' or light.hall_door == 'on' ):
        log.info("1. Kitchen LED: IKEA-switch should be turned ON....")
        if( switch.kok_led_sec_switch == 'on' ):
            log.info("1. Kitchen LED IKEA-Switch already On, go directly to PWW-Control")
            handle_kitchen_worklights()
        else:
            log.info("1. Kitchen LED, Turn ON IKEA Switch")
            switch.turn_on(entity_id='switch.kok_led_sec_switch')
    else:
        log.info("1. Kitchen LED, IKEA switch OFF")
        switch.turn_off(entity_id='switch.kok_led_sec_switch')

# Triggers when the IKEA Switch changes state. Goes On or Off
@event_trigger(EVENT_STATE_CHANGED, "entity_id=='switch.kok_led_sec_switch'")
def kitchen_worklights_security_switch_trigger(entity_id, new_state, old_state):
    log.info(f"2. Trigger on kitchen IKEA Switch:{switch.kok_led_sec_switch}")
    if( switch.kok_led_sec_switch=='on' ):
        log.info("2. Kitchen LED. Wait 300mS before control of PWM")
        task.sleep(0.3)
    handle_kitchen_worklights()

# Controls the PWM of the kitchen workbench LED-Strips
# Does not control the IKEA Switch that turns everything On/Off
def handle_kitchen_worklights():
    log.info(f"3. Kitchen LED. Control PWMs:{input_boolean.kitchen_worklights} HALL:{light.hall_door}")
    if( input_boolean.kitchen_worklights == 'on' ):
        log.info("3. Kitchen LED. Full mode...")
        light.turn_on(entity_id='light.kitchen_worktop_4k',brightness='63')
        light.turn_on(entity_id='light.kitchen_worktop_27k',brightness='127')
    elif( light.hall_door == 'on' ):
        log.info("3. Kitchen LED. Soft mode...")
        light.turn_off(entity_id='light.kitchen_worktop_4k')
        light.turn_on(entity_id='light.kitchen_worktop_27k',brightness='12')
    else:
        log.info("3. Kitchen LED. Off mode...")
        light.turn_off(entity_id='light.kitchen_worktop_4k')
        light.turn_off(entity_id='light.kitchen_worktop_27k')



@state_trigger("select.fridge_door_alarm")
def reset_fridge_alarm_state(value=None, old_value=None):
    log.info(f"********* FRIDGE ALARM CONFIG *********** To:" + value + " From:" + old_value)
    if value == 'TEST':
        #task.sleep(1)  # Wait 1 second
        select.fridge_door_alarm = old_value
        mqtt.publish(topic="kitchen/fridge/doorAlarmControl", payload=old_value , retain=True)