skjsk

Drivers/CMSIS/Device/ST/STM32L1xx/Source/Templates/system_stm32l1xx.c

@@ -0,0 +1,416 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32l1xx.c
+  * @author  MCD Application Team
+  * @version V2.0.0
+  * @date    5-September-2014
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  *             
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32l1xx.s" file.
+  *                        
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.   
+  *      
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l1xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32L1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32l1xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Private_Defines
+  * @{
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM32L152D_EVAL board as data memory  */
+/* #define DATA_IN_ExtSRAM */
+  
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock    = 32000000;
+__IO const uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48};
+__IO const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system.
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /*!< Set MSION bit */
+  RCC->CR |= (uint32_t)0x00000100;
+
+  /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
+  RCC->CFGR &= (uint32_t)0x88FFC00C;
+  
+  /*!< Reset HSION, HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xEEFEFFFE;
+
+  /*!< Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
+  RCC->CFGR &= (uint32_t)0xFF02FFFF;
+
+  /*!< Disable all interrupts */
+  RCC->CIR = 0x00000000;
+
+#ifdef DATA_IN_ExtSRAM
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM */
+    
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif
+}
+
+/**
+  * @brief  Update SystemCoreClock according to Clock Register Values
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is MSI, SystemCoreClock will contain the MSI 
+  *             value as defined by the MSI range.
+  *                                   
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value
+  *              8 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* MSI used as system clock */
+      msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
+      SystemCoreClock = (32768 * (1 << (msirange + 1)));
+      break;
+    case 0x04:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x08:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x0C:  /* PLL used as system clock */
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
+      plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
+      pllmul = PLLMulTable[(pllmul >> 18)];
+      plldiv = (plldiv >> 22) + 1;
+      
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock selected as PLL clock entry */
+        SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
+      }
+      else
+      {
+        /* HSE selected as PLL clock entry */
+        SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
+      }
+      break;
+    default: /* MSI used as system clock */
+      msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
+      SystemCoreClock = (32768 * (1 << (msirange + 1)));
+      break;
+  }
+  /* Compute HCLK clock frequency --------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in SystemInit() function before jump to main.
+  *         This function configures the external SRAM mounted on STM32L152D_EVAL board
+  *         This SRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+/*-- GPIOs Configuration -----------------------------------------------------*/
+/*
+ +-------------------+--------------------+------------------+------------------+
+ +                       SRAM pins assignment                                   +
+ +-------------------+--------------------+------------------+------------------+
+ | PD0  <-> FSMC_D2  | PE0  <-> FSMC_NBL0 | PF0  <-> FSMC_A0 | PG0 <-> FSMC_A10 |
+ | PD1  <-> FSMC_D3  | PE1  <-> FSMC_NBL1 | PF1  <-> FSMC_A1 | PG1 <-> FSMC_A11 |
+ | PD4  <-> FSMC_NOE | PE7  <-> FSMC_D4   | PF2  <-> FSMC_A2 | PG2 <-> FSMC_A12 |
+ | PD5  <-> FSMC_NWE | PE8  <-> FSMC_D5   | PF3  <-> FSMC_A3 | PG3 <-> FSMC_A13 |
+ | PD8  <-> FSMC_D13 | PE9  <-> FSMC_D6   | PF4  <-> FSMC_A4 | PG4 <-> FSMC_A14 |
+ | PD9  <-> FSMC_D14 | PE10 <-> FSMC_D7   | PF5  <-> FSMC_A5 | PG5 <-> FSMC_A15 |
+ | PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8   | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 |
+ | PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9   | PF13 <-> FSMC_A7 |------------------+
+ | PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10  | PF14 <-> FSMC_A8 | 
+ | PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11  | PF15 <-> FSMC_A9 | 
+ | PD14 <-> FSMC_D0  | PE15 <-> FSMC_D12  |------------------+
+ | PD15 <-> FSMC_D1  |--------------------+ 
+ +-------------------+
+*/
+
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHBENR   = 0x000080D8;
+  
+  /* Connect PDx pins to FSMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CC00CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A0A;
+  /* Configure PDx pins speed to 40 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0F0F;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FSMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 40 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC00F;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FSMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 40 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FSMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x00000C00;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00200AAA;
+  /* Configure PGx pins speed to 40 MHz */ 
+  GPIOG->OSPEEDR = 0x00300FFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+/*-- FSMC Configuration ------------------------------------------------------*/
+  /* Enable the FSMC interface clock */
+  RCC->AHBENR    = 0x400080D8;
+
+  /* Configure and enable Bank1_SRAM3 */
+  FSMC_Bank1->BTCR[4]  = 0x00001011;
+  FSMC_Bank1->BTCR[5]  = 0x00000300;
+  FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF;
+/*
+  Bank1_SRAM3 is configured as follow:
+
+  p.FSMC_AddressSetupTime = 0;
+  p.FSMC_AddressHoldTime = 0;
+  p.FSMC_DataSetupTime = 3;
+  p.FSMC_BusTurnAroundDuration = 0;
+  p.FSMC_CLKDivision = 0;
+  p.FSMC_DataLatency = 0;
+  p.FSMC_AccessMode = FSMC_AccessMode_A;
+
+  FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3;
+  FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
+  FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
+  FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
+  FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
+  FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
+  FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
+  FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
+  FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
+  FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
+  FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
+  FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
+  FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
+  FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
+  FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
+
+  FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); 
+
+  FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE);
+*/
+  
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/